Wishlist

From SkullSpace Wiki
Revision as of 21:03, 17 May 2011 by Dragon Eater (talk)
Jump to navigation Jump to search

For everything in this list we are accepting both donations of items and lending of items.


Donations - D

A straight up donation, where SkullSpace gets ownership of the item.


Lending - L

A form of borrowing where the owner retains ownership but lends the item to skullspace indefinitely. The owner will have to sign a piece of paper stating that a) if if gets broken, SkullSpace or whomever broke it isn't liable, the owner is basically boned and b) the owner must provide at least 30 days notice before removing the item from the space (taking it back), in order to allow SkullSpace to obtain a replacement.

Needs

These items we need to have in our space on day 1.

Kitchen Area
Item Notes Cost/Donator
Microwave Something newer Jeremy
Fridge For drinks (pop, etc) primarily D- Mike with a Hat
Coffee Maker Ideally with an ethernet port :) Sean (@MorsRedigo)
Garbage Can Somewhere to put the trash $??
Recycling Bin Somewhere to put the recyclables $??
Laptop Work Area
Item Notes Cost/Donator
Tables Four dj style tables $??

D - Andrew (desk w/ credenza and large side table, seats 4)

Chairs 16 comfy chairs $??
Couches Two newer couches D - Russ (2 free couches, need transport/help moving)
Side tables Two of them, for coffee cups etc next to couches $??
Networking Equipment
Item Notes Cost/Donator
Switch Cisco 3550 L - Richard
Switch Intel 24port 10/100 D - Jason (notjason)
Cat6 Might as well get a whole spool of it, along with ends and a crimper D - Jason (notjason) (~600ft,~50ends,crimper)
WiFi AP Mikrotik RouterBoard A/B/G/N L - Richard
Presentation Area
Item Notes Cost/Donator
Projector Something that takes VGA+ :P $??
Projector screen Something white and flat to project onto Crow
Work Bench Area
Item Notes Cost/Donator
Work Bench Something you can sit at and solder/etc $??
Seats A couple seats for work bench. If the work bench is tall enough for standing work, perhaps we could get some tall stools to allow people to sit also? $??
Soldering irons Two soldering irons to start D - Russ(a cheaper one)

D - Ben (one with cord, needs new tip, one cordless that sucks but has a good tip)

D - Andrew (Mastercraft 40W, ugly tip)

Fume/smoke collector Fume filter/fan I have a few fans that would work for this, duct work is easy to do. (MikeHat)
Helping Hands tool One of these per soldering station would be nice [1]
Panavise Very handy for circuit boards and other things [2]
Fire Extinguishers Two ABC dry chem, also a class D would be nice Crow
First Aid Kit Should be decently epic Crow
Drill D - Ben (probably) (old with cord, works well)

D - Andrew (corded)

Jigsaw Andrew (handheld, corded, no blades)
LIbrary
Item Notes Cost/Donator
Bookshelf $??
Books Any relevant topics Everyone has books to lend
Other Stuff
Item Notes Cost/Donator
Access Control System Card access? This is to allow members access to the space. $?? / MikeHat's company may donate
Alarm System To protect our stuff, or at least annoy thieves. Might help lower insurance costs? $I have an old home based system should work out ok.

Wants

Things we don't need on day 1, but moving forward we would very much like to acquire.

Item Notes Cost/Donator
Sound System Two speakers, maybe a sub -L/D Russ - old RCA, decent.
Microphone Something you can clip on your clothes, this is for presenters giving talks. Something suitable to feed into a recording setup. $??
Video camera Something that can be hooked into a computer running dvswitch for live mixing. This is to be framed on the presenter, while a feed of the desktop will be mixed with it. $??
Tripod for camera Something to keep it steady $?? - D Ben (kind of old and not the most portable, but does as description requires)
Recording system / Media center Basically a computer dedicated to recording. Needs a decent hard drive or fast fileserver access (raw DV is 3MB/s). Also might need a firewire port (depends on camera), doesn't need much else really. Ethernet connection to the presentation laptop to grab a stream of the screen. This could double as a media centre for playing music when we are not presenting. In this case it needs a sound card. $??
Lamps Should have one high power lamp for each soldering/etc station $??
TV For video games I guess $??
Video games For TV I guess $??
Hosting space 42u Locking Rack with PDU L - Richard
Laser cutter LAZZZZZOR $??
Printer Samsung CLP-310N L - Andrew
3D Printer MakerBot or something we could assemble as a project would be cool. Ultimaker looks interesting (basically Makerbot that moves the print head instead of the platform to allow larger objects) but isn't officially out yet [3] $??
Water Cooler For water $??
Welder Arc and/or MIG, to make swing bikes $??
Darkroom For developing photographs $??
Lightbox or Light table For tracing/viewing schematics/blueprints $??
Lego Mindstorms Kits Robots. 'Nuff said. $??