Summit 400-48t - Revision history

Markjenkinsparit: Problems with the Summit 400-48t, documented as unplugged and not split into VLANs as per docs

2026-02-27T02:31:16Z

Problems with the Summit 400-48t, documented as unplugged and not split into VLANs as per docs

Markjenkinsparit: march 7 switch changes

2024-03-08T02:45:43Z

march 7 switch changes

Markjenkinsparit at 20:05, 12 October 2023

2023-10-12T20:05:06Z

Markjenkinsparit at 02:28, 23 August 2023

2023-08-23T02:28:52Z

Markjenkinsparit at 01:28, 23 August 2023

2023-08-23T01:28:53Z

Markjenkinsparit at 01:55, 16 August 2023

2023-08-16T01:55:19Z

Markjenkinsparit: start documenting switch donated by Edwin

2023-08-09T00:05:54Z

start documenting switch donated by Edwin

New page

A 48 port managed switch.

(gigabit?)

Has passwords: Mark Jenkins (TODO more people)

Was believed to have been assigned a 172.30.9.0/24 ip address on the multi-port management LAN but does not show up

== Ports ==

===LAN group===
#shared optical and twisted port, twisted port has green cable to Cisco internal LAN switch
#shared optical and twisted port, twisted port has blue cable to HP DL380e port 1 (numbered 1-4)
#shared optical and twisted port, unused on both
#shared optical and twisted port, unused on both

===Management group===
*46 grey cable, management network connected to [[vmsrv]] eth3
*47 grey cable, management network, connected ti HP DL380e ILO
*48 blank, but assigned to management network

← Older revision		Revision as of 02:31, 27 February 2026
Line 2:		Line 2:

	(gigabit?)		(gigabit?)
		+
		+	Everything on this page is out of date at the moment. VLANs were established, switch ports were assigned, power cycle tests were done and all seemed fine. Then a big power outage came along and reset everything, calling into question if we can rely on VLANing this switch. This switch is currently powered down.
		+

	Has passwords: Mark Jenkins, Chris Cartwright, Edwin Amsler.		Has passwords: Mark Jenkins, Chris Cartwright, Edwin Amsler.

@@ Line 19: / Line 19: @@
 * Default
 * skspmgmt
-* accessctrlcamera -- Access control system and camera system 192.168.1.100 (vm), 192.168.1.3 (vm host), 192.168.1.4 (mark test lxd container), 192.168.1.250 (serial port relay)
+* accessctrlcamera -- Access control system and camera system (currently isolated on the PoESwitch)
 * Mgmt -- for management vlan on back
 == Ports ==
@@ Line 29: / Line 31: @@
 #shared optical and twisted port, unused on both
 #shared optical and twisted port, unused on both
 ===Access Control and Camera===
-*41 blue cable, black boot, goes to access control management workstation 192.168.1.100 (vm) / 192.168.1.3 (vm host)
+*41 empty
-*42 white cable, goes to access control serial protocol relay device 192.168.1.250
+*42 empty
 *43 empty
 *44 empty

@@ Line 19: / Line 19: @@
 * Default
 * skspmgmt
-* accessctrlcamera -- Access control system and camera system (192.168.1.100 (vm), 192.168.1.3 (vm host), 192.168.)
+* accessctrlcamera -- Access control system and camera system 192.168.1.100 (vm), 192.168.1.3 (vm host), 192.168.1.4 (mark test lxd container), 192.168.1.250 (serial port relay)
 * Mgmt -- for management vlan on back

@@ Line 3: / Line 3: @@
 (gigabit?)
-Has passwords: Mark Jenkins (TODO more people)
+Has passwords: Mark Jenkins, Chris Cartwright, Edwin Amsler.
 Assigned to 172.30.9.2/24 on skspmgmt VLAN and 192.168.30.2/24 on the Mgmnt VLAN (back port mgmt)
 == VLANs ==
 * Default
 * skspmgmt
-* accessctrlcamera -- Access control system and camera system
+* accessctrlcamera -- Access control system and camera system (192.168.1.100 (vm), 192.168.1.3 (vm host), 192.168.)
 * Mgmt -- for management vlan on back
@@ Line 23: / Line 32: @@
 ===Access Control and Camera===
-*41
+*41 blue cable, black boot, goes to access control management workstation 192.168.1.100 (vm) / 192.168.1.3 (vm host)
-*42
+*42 white cable, goes to access control serial protocol relay device 192.168.1.250
-*43
+*43 empty
-*44
+*44 empty
 ===Management group===
 *47 grey cable, sksp management network, connected to HP DL380e ILO
 *48 grey cable, sksp management network connected to [[vmsrv]] eth3

@@ Line 10: / Line 10: @@
 * Default
 * skspmgmt
 * Mgmt -- for management vlan on back
@@ Line 20: / Line 21: @@
 #shared optical and twisted port, unused on both
 ===Management group===
 *47 grey cable, sksp management network, connected to HP DL380e ILO
 *48 grey cable, sksp management network connected to [[vmsrv]] eth3