Difference between revisions of "User talk:Jackfusion"

From SkullSpace Wiki
Jump to navigation Jump to search
m (Monster Server)
 
m (Monster Server)
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
== Monster Server ==
+
== Monster Server ==
  
Here is the start of my monster server.  I will be updating the log and uploading pictures of my first case mod ever.  The next parts that I will be adding are lawn mover wheels on the back from a push mower because when I am finished it will be to heavy to carry around and I am not to sure aboout the front wheel or wheels yet.  I will also be adding a latch to the front to keep the case closed.
+
Here is the start of my monster server.  I will be updating the log and uploading pictures of my first case mod ever.  The next parts that I will be adding are coaster wheels on the bottom of both sides of the case because when I am finish construction of the system it will be to heavy to carry around.  I will also be adding a cigar style lock to the front od the case to keep the case closed and will be using a skeleton key open the system.  
  
 [[Image:Backcasedcase.jpeg|400px]][[Image:Closedbookcase.jpeg|400px]]
+
 [[Image:Backcasedcase.jpeg|400px|Backcasedcase.jpeg]][[Image:Closedbookcase.jpeg|400px|Closedbookcase.jpeg]]  
  
[[Image:Opencase.jpeg|400px]][[Image:Backopenbook.jpg|400px]]
+
[[Image:Opencase.jpeg|400px|Opencase.jpeg]][[Image:Backopenbook.jpg|400px|Backopenbook.jpg]]  
 +
 
 +
Update as of 03/15/2012
 +
 
 +
[[Image:Kens monster server inside.jpg|400px|Kens monster server inside.jpg]][[Image:Kensmonsterserverleftside.jpg|400px|Kensmonsterserverleftside.jpg]]
 +
 
 +
Here are the beginnings of the inside of my server.  Here is what is in the case.
 +
 
 +
4 X 500 gig<br>
 +
 
 +
3 X 80 gig
 +
 
 +
1 X terabyte
 +
 
 +
2 gig ram
 +
 
 +
1 promise sata controller card
 +
 
 +
P5GD1-VM Rev 1.06 motherboard
 +
 
 +
1 gig network card
 +
 
 +
1000 wat power supply<br>
 +
 
 +
The size of the case is&nbsp;
 +
 
 +
hieght 24.5"
 +
 
 +
width 16.5"
 +
 
 +
depth 15"
 +
 
 +
[[Image:Kensmonsterserverarchloading.jpg|400px|Kensmonsterserverarchloading.jpg]][[Image:Kensmonsterserverarchrunning.jpg|400px|Kensmonsterserverarchrunning.jpg]]
 +
 
 +
After zeroing the hard drivers which took 48 hours. &nbsp;Arch Linux now loads and runs on the system.

Latest revision as of 16:51, 20 March 2012

Monster Server

Here is the start of my monster server.  I will be updating the log and uploading pictures of my first case mod ever.  The next parts that I will be adding are coaster wheels on the bottom of both sides of the case because when I am finish construction of the system it will be to heavy to carry around.  I will also be adding a cigar style lock to the front od the case to keep the case closed and will be using a skeleton key open the system.

 Backcasedcase.jpegClosedbookcase.jpeg

Opencase.jpegBackopenbook.jpg

Update as of 03/15/2012

Kens monster server inside.jpgKensmonsterserverleftside.jpg

Here are the beginnings of the inside of my server.  Here is what is in the case.

4 X 500 gig

3 X 80 gig

1 X terabyte

2 gig ram

1 promise sata controller card

P5GD1-VM Rev 1.06 motherboard

1 gig network card

1000 wat power supply

The size of the case is 

hieght 24.5"

width 16.5"

depth 15"

Kensmonsterserverarchloading.jpgKensmonsterserverarchrunning.jpg

After zeroing the hard drivers which took 48 hours.  Arch Linux now loads and runs on the system.