Difference between revisions of "Summit 400-48t"
Jump to navigation
Jump to search
(Problems with the Summit 400-48t, documented as unplugged and not split into VLANs as per docs) |
|||
| (4 intermediate revisions by the same user not shown) | |||
| Line 3: | Line 3: | ||
(gigabit?) | (gigabit?) | ||
| − | Has passwords: Mark Jenkins | + | Everything on this page is out of date at the moment. VLANs were established, switch ports were assigned, power cycle tests were done and all seemed fine. Then a big power outage came along and reset everything, calling into question if we can rely on VLANing this switch. This switch is currently powered down. |
| + | |||
| + | |||
| + | Has passwords: Mark Jenkins, Chris Cartwright, Edwin Amsler. | ||
Assigned to 172.30.9.2/24 on skspmgmt VLAN and 192.168.30.2/24 on the Mgmnt VLAN (back port mgmt) | Assigned to 172.30.9.2/24 on skspmgmt VLAN and 192.168.30.2/24 on the Mgmnt VLAN (back port mgmt) | ||
| + | |||
| + | Old ssh support is enabled, works best through putty. | ||
| + | With OpenSSH, tried | ||
| + | KexAlgorithms +diffie-hellman-group1-sha1 | ||
| + | HostKeyAlgorithms +ssh-dss | ||
| + | Ciphers +3des-cbc | ||
| + | MACs +hmac-md5 | ||
| + | in .ssh/config, which resolved some issues, but still had error | ||
| + | ssh_dispatch_run_fatal: ... invalid format | ||
== VLANs == | == VLANs == | ||
* Default | * Default | ||
* skspmgmt | * skspmgmt | ||
| + | * accessctrlcamera -- Access control system and camera system (currently isolated on the PoESwitch) | ||
* Mgmt -- for management vlan on back | * Mgmt -- for management vlan on back | ||
| + | * nowhere | ||
| + | * lesnetpub -- public ip address from les.net | ||
== Ports == | == Ports == | ||
| Line 20: | Line 35: | ||
#shared optical and twisted port, unused on both | #shared optical and twisted port, unused on both | ||
| + | ===Les.net Public=== | ||
| + | * 35 assigned but empty | ||
| + | * 36 assigned but empty | ||
| + | * 37 assigned but empty | ||
| + | * 38 assigned but empty | ||
| + | * 39 assigned but empty | ||
| + | * 40 assigned but empty | ||
| + | |||
| + | ===Access Control and Camera=== | ||
| + | Not assigned | ||
| + | |||
| + | ===Not assigned to anything=== | ||
| + | |||
| + | *41 empty | ||
| + | *42 empty | ||
| + | *43 empty | ||
| + | *44 empty | ||
===Management group=== | ===Management group=== | ||
*47 grey cable, sksp management network, connected to HP DL380e ILO | *47 grey cable, sksp management network, connected to HP DL380e ILO | ||
*48 grey cable, sksp management network connected to [[vmsrv]] eth3 | *48 grey cable, sksp management network connected to [[vmsrv]] eth3 | ||
Latest revision as of 02:31, 27 February 2026
A 48 port managed switch.
(gigabit?)
Everything on this page is out of date at the moment. VLANs were established, switch ports were assigned, power cycle tests were done and all seemed fine. Then a big power outage came along and reset everything, calling into question if we can rely on VLANing this switch. This switch is currently powered down.
Has passwords: Mark Jenkins, Chris Cartwright, Edwin Amsler.
Assigned to 172.30.9.2/24 on skspmgmt VLAN and 192.168.30.2/24 on the Mgmnt VLAN (back port mgmt)
Old ssh support is enabled, works best through putty. With OpenSSH, tried
KexAlgorithms +diffie-hellman-group1-sha1 HostKeyAlgorithms +ssh-dss Ciphers +3des-cbc MACs +hmac-md5
in .ssh/config, which resolved some issues, but still had error
ssh_dispatch_run_fatal: ... invalid format
Contents
VLANs
- Default
- skspmgmt
- accessctrlcamera -- Access control system and camera system (currently isolated on the PoESwitch)
- Mgmt -- for management vlan on back
- nowhere
- lesnetpub -- public ip address from les.net
Ports
LAN group
- shared optical and twisted port, twisted port has green cable to Cisco internal LAN switch
- shared optical and twisted port, twisted port has blue cable to HP DL380e port 1 (numbered 1-4)
- shared optical and twisted port, unused on both
- shared optical and twisted port, unused on both
Les.net Public
- 35 assigned but empty
- 36 assigned but empty
- 37 assigned but empty
- 38 assigned but empty
- 39 assigned but empty
- 40 assigned but empty
Access Control and Camera
Not assigned
Not assigned to anything
- 41 empty
- 42 empty
- 43 empty
- 44 empty
Management group
- 47 grey cable, sksp management network, connected to HP DL380e ILO
- 48 grey cable, sksp management network connected to vmsrv eth3
