Difference between revisions of "Wishlist Archive"

From SkullSpace Wiki
Jump to navigation Jump to search
m
m
 
(3 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
For everything in this list we accepted either donation of the item or lending of item.
 
For everything in this list we accepted either donation of the item or lending of item.
  
 +
Abbreviations used:
  
−
Donations - D
+
D - Donations. A straight up donation, where SkullSpace gets ownership of the item.
  
−
A straight up donation, where SkullSpace gets ownership of the item.
+
L - Lending. A form of borrowing where the owner retains ownership but lends the item to skullspace indefinitely. The owner will have to sign a piece of paper stating that a) if the item gets broken, SkullSpace or whomever broke it isn't liable, and b) the owner must provide at least 30 days notice before removing the item from the space (taking it back), in order to allow SkullSpace to obtain a replacement.
  
−
 
+
If anything is removed or reclaimed, and we decide we need to replace it, please move the entry back to [[Wishlist]].
−
Lending - L
 
−
 
 
−
A form of borrowing where the owner retains ownership but lends the item to skullspace indefinitely. The owner will have to sign a piece of paper stating that a) if if gets broken, SkullSpace or whomever broke it isn't liable, the owner is basically boned and b) the owner must provide at least 30 days notice before removing the item from the space (taking it back), in order to allow SkullSpace to obtain a replacement.
 
−
 
 
−
If anything is removed or reclaimed, and we decide we need to get it again, please move the entry back to [[Wishlist]].
 
  
 
==Needs==
 
==Needs==
Line 113: Line 109:
 
| D - Jason (notjason) (~600ft,~50ends,crimper)
 
| D - Jason (notjason) (~600ft,~50ends,crimper)
 
| Yes
 
| Yes
 +
|-
 +
| Switch
 +
| Intel 24port 10/100
 +
| D - Jason (notjason)
 +
| No
 +
|-
 +
| WiFi AP
 +
| Mikrotik RouterBoard A/B/G/N
 +
| L - Richard
 +
| No
 +
|-
 +
| Switch
 +
| Cisco 3550
 +
| L - Richard
 +
| No
 
|-
 
|-
 
| Scanner
 
| Scanner
Line 151: Line 162:
 
| A couple seats for work bench. If the work bench is tall enough for standing work, perhaps we could get some tall stools to allow people to sit also?
 
| A couple seats for work bench. If the work bench is tall enough for standing work, perhaps we could get some tall stools to allow people to sit also?
 
| D - Linear Systems
 
| D - Linear Systems
 +
| Yes
 +
|-
 +
| Hot air rework station
 +
| For doing reflow soldering/unsoldering, useful for surface mount parts and desoldering parts with many pins
 +
| L - Ben Bergman
 
| Yes
 
| Yes
 
|-
 
|-
Line 158: Line 174:
 
D - Ben (one with cord, needs new tip, one cordless that sucks but has a good tip)
 
D - Ben (one with cord, needs new tip, one cordless that sucks but has a good tip)
 
D - Andrew (Mastercraft 40W, ugly tip)
 
D - Andrew (Mastercraft 40W, ugly tip)
 +
| Yes
 +
|-
 +
| Fire Extinguishers
 +
|
 +
| Provided by landlord through Pyrene
 +
| Yes
 +
|-
 +
| First Aid Kit
 +
|
 +
| D - Mike/Hat
 +
| Need more
 +
|-
 +
| Drill
 +
|
 +
| D - Andrew (corded)
 +
| Yes
 +
|-
 +
| Jigsaw
 +
| Could use a good one
 +
| Andrew (handheld, corded, no blades)
 
| Yes
 
| Yes
 
|-
 
|-
Line 193: Line 229:
 
| Adrian, could use others
 
| Adrian, could use others
 
| Yes
 
| Yes
 +
|-
 +
| Access Control System
 +
|
 +
| $500
 +
| Yes
 +
|-
 
|}
 
|}
  
Line 240: Line 282:
 
| Found them!
 
| Found them!
 
| Yes
 
| Yes
 +
|-
 +
| Printer
 +
| [http://www.samsung.com/ca/consumer/office/printer-multifunction/colour-laser/CLP-310N/XAA/index.idx?pagetype=prd_detail&returnurl= Samsung CLP-310N]
 +
| L - Andrew
 +
| Yes
 +
|-
 +
| 3D Printer
 +
| MakerBot or something we could assemble as a project would be cool. Ultimaker looks interesting (basically Makerbot that moves the print head instead of the platform to allow larger objects) but isn't officially out yet [http://blog.ultimaker.com/]
 +
| Purchased by SkullSpace
 +
| Yes
 +
|-
 
|}
 
|}
  
 
[[Category:Space]]
 
[[Category:Space]]

Latest revision as of 18:13, 4 October 2017

For everything in this list we accepted either donation of the item or lending of item.

Abbreviations used:

D - Donations. A straight up donation, where SkullSpace gets ownership of the item.

L - Lending. A form of borrowing where the owner retains ownership but lends the item to skullspace indefinitely. The owner will have to sign a piece of paper stating that a) if the item gets broken, SkullSpace or whomever broke it isn't liable, and b) the owner must provide at least 30 days notice before removing the item from the space (taking it back), in order to allow SkullSpace to obtain a replacement.

If anything is removed or reclaimed, and we decide we need to replace it, please move the entry back to Wishlist.

Needs

These are important items we've gotten.

Kitchen Area
Item Notes Donator Have it?
Microwave Something newer Jeremy Yes
Fridge For drinks (pop, etc.) primarily D- Mike with a Hat Yes
Coffee Maker Ideally with an ethernet port :) Sean (@MorsRedigo) Yes
Garbage Cans Somewhere to put the trash Yes
Recycling Bins Somewhere to put the recyclables Yes
Toaster Oven (Convection) Cooking D - Siu Yes
Skillet Pancakes, etc D - Ric Yes
Metal mixing bowls There's basically nothing to stir hot things in. There are those salad bowls, but they'd melt if you put anything hot in them. D - A. Michael Yes
Corelle bowls As long as we have just that one skillet to cook things in, you'd have to toss some ingredients into a bowl while preparing the next portion. I just wouldn't trust those plastic bowls. D - A. Michael Yes
Ladle For soup, of course. D - A. Michael Yes
Laptop Work Area
Item Notes Donator Have it?
Tables Four dj style tables D - Andrew (desk w/ credenza and large side table, seats 4) Yes
Chairs stacking chairs for occasional use Yes
Couches Two newer couches D - Russ (2 free couches, need transport/help moving) Yes
Side tables Two of them, for coffee cups etc next to couches Yes
Networking Equipment
Item Notes Donator Have it?
Cat6 Might as well get a whole spool of it, along with ends and a crimper D - Jason (notjason) (~600ft,~50ends,crimper) Yes
Switch Intel 24port 10/100 D - Jason (notjason) No
WiFi AP Mikrotik RouterBoard A/B/G/N L - Richard No
Switch Cisco 3550 L - Richard No
Scanner D - Marcel Yes - being set up (terminator on order)
Presentation Area
Item Notes Donator Have it?
Projector Something that takes VGA+ :P Yes
Projector screen Something white and flat to project onto - like drywall, but prettier L - Mike/Hat Yes
Work Bench Area
Item Notes Donator Have it?
Work Bench Something you can sit at and solder/etc D - Linear Systems Yes
Seats A couple seats for work bench. If the work bench is tall enough for standing work, perhaps we could get some tall stools to allow people to sit also? D - Linear Systems Yes
Hot air rework station For doing reflow soldering/unsoldering, useful for surface mount parts and desoldering parts with many pins L - Ben Bergman Yes
Soldering irons Two soldering irons to start D - Russ(a cheaper one)

D - Ben (one with cord, needs new tip, one cordless that sucks but has a good tip) D - Andrew (Mastercraft 40W, ugly tip)

Yes
Fire Extinguishers Provided by landlord through Pyrene Yes
First Aid Kit D - Mike/Hat Need more
Drill D - Andrew (corded) Yes
Jigsaw Could use a good one Andrew (handheld, corded, no blades) Yes
Library
Item Notes Donator Have it?
Bookshelf Yes
Books Any relevant topics - can always use more Everyone has books to lend Yes
Other Stuff
Item Notes Donator Have it?
Paint A good coat of paint would make a huge difference Les.net Yes
Air conditioner(s) Window AC is fine, we'll likely need several Adrian, could use others Yes
Access Control System $500 Yes

Wants

Things we don't need on day 1, but moving forward we would very much like to acquire.

Item Notes Donator Have it?
Sound System Two speakers, maybe a sub -L/D Russ - old RCA, decent. Yes
Video camera Something that can be hooked into a computer running dvswitch for live mixing. This is to be framed on the presenter, while a feed of the desktop will be mixed with it. D Chris (Canon Powershot TX1)

7.1 MP Stills / 640x480 digital video

Yes
Tripod for camera Something to keep it steady D Chris

D Ben (kind of old and not the most portable, but does as description requires)

Yes
Hosting space 42u Locking Rack with PDU L - Richard Yes
Welder Arc and/or MIG, to make swing bikes (Arc + comps = BAD ) Yes
Air compressor 2.5 Gallon, 3HP D Chris Yes
RCA gender changers To join some long RCA audio cables to an RCA-to-3.5mm cable, for easy access to audio on the sound system when connected through VGA in the lounge. Found them! Yes
Printer Samsung CLP-310N L - Andrew Yes
3D Printer MakerBot or something we could assemble as a project would be cool. Ultimaker looks interesting (basically Makerbot that moves the print head instead of the platform to allow larger objects) but isn't officially out yet [1] Purchased by SkullSpace Yes
Retrieved from "https://wiki.skullspace.ca/index.php?title=Wishlist_Archive&oldid=4712"