Difference between revisions of "Summit 400-48t"
Jump to navigation
Jump to search
Line 3: | Line 3: | ||
(gigabit?) | (gigabit?) | ||
− | Has passwords: Mark Jenkins | + | Has passwords: Mark Jenkins, Chris Cartwright, Edwin Amsler. |
Assigned to 172.30.9.2/24 on skspmgmt VLAN and 192.168.30.2/24 on the Mgmnt VLAN (back port mgmt) | Assigned to 172.30.9.2/24 on skspmgmt VLAN and 192.168.30.2/24 on the Mgmnt VLAN (back port mgmt) | ||
+ | |||
+ | Old ssh support is enabled, works best through putty. | ||
+ | With OpenSSH, tried | ||
+ | KexAlgorithms +diffie-hellman-group1-sha1 | ||
+ | HostKeyAlgorithms +ssh-dss | ||
+ | Ciphers +3des-cbc | ||
+ | MACs +hmac-md5 | ||
+ | in .ssh/config, which resolved some issues, but still had error | ||
+ | ssh_dispatch_run_fatal: ... invalid format | ||
== VLANs == | == VLANs == | ||
* Default | * Default | ||
* skspmgmt | * skspmgmt | ||
− | * accessctrlcamera -- Access control system and camera system | + | * accessctrlcamera -- Access control system and camera system (192.168.1.100 (vm), 192.168.1.3 (vm host), 192.168.) |
* Mgmt -- for management vlan on back | * Mgmt -- for management vlan on back | ||
Line 23: | Line 32: | ||
===Access Control and Camera=== | ===Access Control and Camera=== | ||
− | *41 | + | *41 blue cable, black boot, goes to access control management workstation 192.168.1.100 (vm) / 192.168.1.3 (vm host) |
− | *42 | + | *42 white cable, goes to access control serial protocol relay device 192.168.1.250 |
− | *43 | + | *43 empty |
− | *44 | + | *44 empty |
===Management group=== | ===Management group=== | ||
*47 grey cable, sksp management network, connected to HP DL380e ILO | *47 grey cable, sksp management network, connected to HP DL380e ILO | ||
*48 grey cable, sksp management network connected to [[vmsrv]] eth3 | *48 grey cable, sksp management network connected to [[vmsrv]] eth3 |
Revision as of 02:28, 23 August 2023
A 48 port managed switch.
(gigabit?)
Has passwords: Mark Jenkins, Chris Cartwright, Edwin Amsler.
Assigned to 172.30.9.2/24 on skspmgmt VLAN and 192.168.30.2/24 on the Mgmnt VLAN (back port mgmt)
Old ssh support is enabled, works best through putty. With OpenSSH, tried
KexAlgorithms +diffie-hellman-group1-sha1 HostKeyAlgorithms +ssh-dss Ciphers +3des-cbc MACs +hmac-md5
in .ssh/config, which resolved some issues, but still had error
ssh_dispatch_run_fatal: ... invalid format
VLANs
- Default
- skspmgmt
- accessctrlcamera -- Access control system and camera system (192.168.1.100 (vm), 192.168.1.3 (vm host), 192.168.)
- Mgmt -- for management vlan on back
Ports
LAN group
- shared optical and twisted port, twisted port has green cable to Cisco internal LAN switch
- shared optical and twisted port, twisted port has blue cable to HP DL380e port 1 (numbered 1-4)
- shared optical and twisted port, unused on both
- shared optical and twisted port, unused on both
Access Control and Camera
- 41 blue cable, black boot, goes to access control management workstation 192.168.1.100 (vm) / 192.168.1.3 (vm host)
- 42 white cable, goes to access control serial protocol relay device 192.168.1.250
- 43 empty
- 44 empty
Management group
- 47 grey cable, sksp management network, connected to HP DL380e ILO
- 48 grey cable, sksp management network connected to vmsrv eth3