Home cassette taping is killing the software industry

A level under development for the Skullspace_Hardware_Programming_Challenge.

• Platform: Atmel AVR micro controller
• IO: AVR analogue to digital converter connected to an old, regular Cassette deck
• Level master: Mark Jenkins
• Difficulty: medium

A secret message has been stored on a cassette tape encoded digitally in the Kansas City standard.

Connected to the audio outputs of the tape deck is at a simple circuit with an Atmel AVR micro controller (specific model not yet selected) with analogue with a analogue to digital unit. Your mission is to write a Atmel AVR program that can decode the Kansas city standard and output the message in over an RS-232 serial output in final form.

The entire setup is in a locked cabinet to keep you from stealing the tape or otherwise grabbing the audio signal and decoding it elsewhere -- programming the AVR micro controller is the only acceptable means of completing the challenge. The tape deck controls are exposed so you can rewind.

Working Development Tools

• AVR C compiler -- GCC
• AVR assembler -- Binutils

Tools needing further development

• Bootloader so AVR can be re-flashed over serial. (Similar to the style of the AVR butterfly). This saves the need for a programmer board or having to connect to the programing pins.
• Programmer to work with bootloader (or, make bootloader compatible with other system programmers)

Circuits needing development

• Power connector

 (it would be really cool if this could just steel and convert power from the tape deck so that the whole system could have one plug)

• RS-232 connector and appropriate handling for PC RS-232 voltages

(a single circuit is useful both for re-programing via a bootloader and as a source of output for tape programs)

• Connection between AVR analogue to digital converter and audio output connector of tape deck

Hardware needing development

• Secret enclosure to hold both tape deck and AVR circuits to prevent players from ejecting and stealing cassette and also from accessing audio out connectors. Only interfaces to outside world are: power plug, tape deck controls, and RS-232 connector.

Hardware to assist level development

Mark has a full-blown development board (|STK500) to lend for developing and loaded the permenent bootloader

Working Documentation

• AVR microcontrollers have a detailed datasheet, will link to once a specific AVR is selected

Documentation needing development

• Description of bootloader protocol and what things the bootloader does to the hardware before you take over