Summit 400-48t
Revision as of 02:28, 23 August 2023 by Markjenkinsparit (talk | contribs)
A 48 port managed switch.
(gigabit?)
Has passwords: Mark Jenkins, Chris Cartwright, Edwin Amsler.
Assigned to 172.30.9.2/24 on skspmgmt VLAN and 192.168.30.2/24 on the Mgmnt VLAN (back port mgmt)
Old ssh support is enabled, works best through putty. With OpenSSH, tried
KexAlgorithms +diffie-hellman-group1-sha1 HostKeyAlgorithms +ssh-dss Ciphers +3des-cbc MACs +hmac-md5
in .ssh/config, which resolved some issues, but still had error
ssh_dispatch_run_fatal: ... invalid format
VLANs
- Default
- skspmgmt
- accessctrlcamera -- Access control system and camera system (192.168.1.100 (vm), 192.168.1.3 (vm host), 192.168.)
- Mgmt -- for management vlan on back
Ports
LAN group
- shared optical and twisted port, twisted port has green cable to Cisco internal LAN switch
- shared optical and twisted port, twisted port has blue cable to HP DL380e port 1 (numbered 1-4)
- shared optical and twisted port, unused on both
- shared optical and twisted port, unused on both
Access Control and Camera
- 41 blue cable, black boot, goes to access control management workstation 192.168.1.100 (vm) / 192.168.1.3 (vm host)
- 42 white cable, goes to access control serial protocol relay device 192.168.1.250
- 43 empty
- 44 empty
Management group
- 47 grey cable, sksp management network, connected to HP DL380e ILO
- 48 grey cable, sksp management network connected to vmsrv eth3