Summit 400-48t

A 48 port managed switch.

(gigabit?)

Everything on this page is out of date at the moment. VLANs were established, switch ports were assigned, power cycle tests were done and all seemed fine. Then a big power outage came along and reset everything, calling into question if we can rely on VLANing this switch. This switch is currently powered down.

Has passwords: Mark Jenkins, Chris Cartwright, Edwin Amsler.

Assigned to 172.30.9.2/24 on skspmgmt VLAN and 192.168.30.2/24 on the Mgmnt VLAN (back port mgmt)

Old ssh support is enabled, works best through putty. With OpenSSH, tried

 KexAlgorithms +diffie-hellman-group1-sha1
 HostKeyAlgorithms +ssh-dss
 Ciphers +3des-cbc
 MACs +hmac-md5

in .ssh/config, which resolved some issues, but still had error

ssh_dispatch_run_fatal: ... invalid format

VLANs

• Default
• skspmgmt
• accessctrlcamera -- Access control system and camera system (currently isolated on the PoESwitch)
• Mgmt -- for management vlan on back
• nowhere
• lesnetpub -- public ip address from les.net

Ports

LAN group

1. shared optical and twisted port, twisted port has green cable to Cisco internal LAN switch
2. shared optical and twisted port, twisted port has blue cable to HP DL380e port 1 (numbered 1-4)
3. shared optical and twisted port, unused on both
4. shared optical and twisted port, unused on both

Les.net Public

• 35 assigned but empty
• 36 assigned but empty
• 37 assigned but empty
• 38 assigned but empty
• 39 assigned but empty
• 40 assigned but empty

Access Control and Camera

Not assigned

Not assigned to anything

• 41 empty
• 42 empty
• 43 empty
• 44 empty

Management group

• 47 grey cable, sksp management network, connected to HP DL380e ILO
• 48 grey cable, sksp management network connected to vmsrv eth3