Wishlist

For everything in this list we are accepting both donations of items and lending of items.

Donations - D

A straight up donation, where SkullSpace gets ownership of the item.

Lending - L

A form of borrowing where the owner retains ownership but lends the item to skullspace indefinitely. The owner will have to sign a piece of paper stating that a) if if gets broken, SkullSpace or whomever broke it isn't liable, the owner is basically boned and b) the owner must provide at least 30 days notice before removing the item from the space (taking it back), in order to allow SkullSpace to obtain a replacement.

Needs

These items we need to have in our space on day 1.

Kitchen Area
Item	Notes	Cost/Donator	Have it?
Microwave	Something newer	Jeremy	Yes
Fridge	For drinks (pop, etc) primarily	D- Mike with a Hat	Yes
Coffee Maker	Ideally with an ethernet port :)	Sean (@MorsRedigo)	Yes
Garbage Can	Somewhere to put the trash	$??	Yes
Recycling Bin	Somewhere to put the recyclables	$??	Yes
Laptop Work Area
Item	Notes	Cost/Donator	Have it?
Tables	Four dj style tables	$?? D - Andrew (desk w/ credenza and large side table, seats 4)	Yes
Chairs	16 comfy chairs	$??	Yes
Couches	Two newer couches	D - Russ (2 free couches, need transport/help moving)	Yes
Side tables	Two of them, for coffee cups etc next to couches	$??	Yes
Networking Equipment
Item	Notes	Cost/Donator	Have it?
Switch	Cisco 3550	L - Richard	No
Switch	Intel 24port 10/100	D - Jason (notjason)	No
Cat6	Might as well get a whole spool of it, along with ends and a crimper	D - Jason (notjason) (~600ft,~50ends,crimper)	Yes
WiFi AP	Mikrotik RouterBoard A/B/G/N	L - Richard	No
UPS	Uninterruptable Power Supply	$??	No
Scanner		$??	No
Presentation Area
Item	Notes	Cost/Donator	Have it?
Projector	Something that takes VGA+ :P	$??	Yes
Projector screen	Something white and flat to project onto	L - Mike/Hat	Yes
Work Bench Area
Item	Notes	Cost/Donator	Have it?
Work Bench	Something you can sit at and solder/etc	$??	Yes
Seats	A couple seats for work bench. If the work bench is tall enough for standing work, perhaps we could get some tall stools to allow people to sit also?	$??	No
Soldering irons	Two soldering irons to start	D - Russ(a cheaper one) D - Ben (one with cord, needs new tip, one cordless that sucks but has a good tip) D - Andrew (Mastercraft 40W, ugly tip)	Yes
Fume/smoke collector	Fume filter/fan	I have a few fans that would work for this, duct work is easy to do. (MikeHat)	No
Helping Hands tool	One of these per soldering station would be nice [1]		No
Panavise	Very handy for circuit boards and other things [2]		No
Fire Extinguishers	Two ABC dry chem, also a class D would be nice	Crow	Yes
First Aid Kit	Should be decently epic	D - Mike/Hat	Yes
Drill		D - Ben (probably) (old with cord, works well) D - Andrew (corded)	Yes
Jigsaw		Andrew (handheld, corded, no blades)	Yes
Library
Item	Notes	Cost/Donator	Have it?
Bookshelf		$??	No
Books	Any relevant topics	Everyone has books to lend	No
Other Stuff
Item	Notes	Cost/Donator	Have it?
Access Control System	Card access? This is to allow members access to the space.	$?? / MikeHat's company may donate	No
Alarm System	To protect our stuff, or at least annoy thieves. Might help lower insurance costs?	$I have an old home based system should work out ok.	No
Paint	A good coat of paint would make a huge difference	Les.net	No
Computer monitors	LCD - for testing, developing, day to day use, etc (we have CRT)	$??	No
Air conditioner(s)	Window AC is fine, we'll likely need several	Adrian, could use others	Yes

Wants

Things we don't need on day 1, but moving forward we would very much like to acquire.

Item	Notes	Cost/Donator	Have it?
Sound System	Two speakers, maybe a sub	-L/D Russ - old RCA, decent.	Yes
Microphone	Something you can clip on your clothes, this is for presenters giving talks. Something suitable to feed into a recording setup.	$??	No
Video camera	Something that can be hooked into a computer running dvswitch for live mixing. This is to be framed on the presenter, while a feed of the desktop will be mixed with it.	$??	Yes
Tripod for camera	Something to keep it steady	$?? - D Ben (kind of old and not the most portable, but does as description requires)	Yes
Recording system / Media center	Basically a computer dedicated to recording. Needs a decent hard drive or fast fileserver access (raw DV is 3MB/s). Also might need a firewire port (depends on camera), doesn't need much else really. Ethernet connection to the presentation laptop to grab a stream of the screen. This could double as a media centre for playing music when we are not presenting. In this case it needs a sound card.	$??	No
Lamps	Should have one high power lamp for each soldering/etc station	$??	No
TV	For video games I guess - flatscreen LCD would be best (we have CRT)	$??	No
Video games	For TV I guess	$??	no
Hosting space	42u Locking Rack with PDU	L - Richard	Yes
Laser cutter	LAZZZZZOR	$??	No
Printer	Samsung CLP-310N	L - Andrew	No
3D Printer	MakerBot or something we could assemble as a project would be cool. Ultimaker looks interesting (basically Makerbot that moves the print head instead of the platform to allow larger objects) but isn't officially out yet [3]	$??	No
Water Cooler	For water	$??	No
Welder	Arc and/or MIG, to make swing bikes (Arc + comps = BAD )	$??	Yes
Darkroom	For developing photographs	adrian have enlarger, trays, ect	No
Lightbox or Light table	For tracing/viewing schematics/blueprints	$??	No
Lego Mindstorms Kits	Robots. 'Nuff said.	$??	No
Rock climbing wall	ceilings are high enough for a decent bouldering wall with big crash mats	$??	No
People scale	Mostly for weighing heavier things	$??	No
Things scale	For weighing things that aren't quite as big as people	$??	No
Air compressor	For weighing things that aren't quite as big as people	$??	No